Polishing equipment GrindMaster Series Centerless polishing machines
All products
LMCL

LMCL series models are designed for finishing of round tubes/bars. These machines are based on centerless belt grinding principle with 1 or 2 heads including wet working processes for better dust control.
The job to be polished is kept on inlet roller supports, it is fed through the flap wheel/grinding/polishing heads and the polished part is unloaded from the outlet roller support of the machine (roller support is optional and not included to the machine, it can be bought additionally). Auxiliary drives for feeding in and bringing out parts is also optional.

   
Machine capability:
Bars – min 6 mm, max 80 mm; 40 kg
Tubes – min 6 mm, max 150 mm; 40 kg
Production rate:
Feed rate – 0.5 m/min to 5 m/min max adjustable
Note: Quoted production rate is depends on diameters of the job, finish requirenebts and quantity of heads on the machine. The feed rate also dependent upon the nature of dents marks, roller marks, scratches, basic raw material quality.
The required time for set up change from one size of tube to another or vice-a-versa is 10-20 minutes maximum.


Features:

Connected Load

8 HP / 5.9 kW

Voltage

380 V AC

Phase

3 phase

Frequency

50 Hz

Operation Pressure

5 Bar

Abrasive belt

100x2000

Belt Grinding motor

7.5 HP

Contact Wheel

Diam. 300x100 mm

Models:

LMCL-01 – one polishing head.
LMCL-02 – two polishing heads.